four-camera video switch
360 input ng antas sa apat na kamera ang isang video output 4 upang 1 matalinong panoramic switcher
Four camera video switch, this model doesn’t support the bird view function, it connects four-camera in your car, harap, back, kanan, and left. When your car turns left, then the monitor will show that the left camera view, when your car turns right, then the monitor will show you the right camera view.
Talahanayan ng nilalaman
Description
360 camera switcher, 4 upang 1 Matalas ang isip 360 Panoramic Switcher ay dapat na magdagdag ng higit pang mga video input para sa camera kapag ito ’ s konektado sa video na interface para sa mga modelo ng iba 't ibang kotse. Ito ’ s mga uri para sa mga DIY na mga solusyon para sa mga customer na may madaling instalasyon. Ang switcher ay maaaring gumana sa isang video na interface, aftermarket kotse DVD o monitor.
Pagtutukoy
- Four video inputs: Left view, Right view, Harap view, and Reverse view. There is a +12V power supply for each video input.
- Four video outputs share with one video channel with the same power trigger line.
- When each camera gets power supply from the corresponding car lamp, the display could show the correct video channel by turn on the left and right indicator or back up. When you turn “R” to other gear, the display will show front view for 7 segundo (it’s optional). Pagkatapos ng 7 segundo, it gets back video output closed state.
- Cable color refers to +12V power (Red cable), PAGWAWASTO – (Black cable), Left indicator (Blue cable), Right indicator (Green cable) and Back-up lamp (White cable)
- The product itself has designed the product power and the camera supply protection circuit carries on the protection to the camera and the vehicle circuit.
- It adopts wireless remote control.
- Wide voltage VCC 8-16V; If it’s applied in the truck, you should use a 24V to 12V transformer.
Pakete
Standard contents: 4 upang 1 intelligent 360 Panoramic Switcher, remote control, manual book.
Instalasyon
- Blue trigger line to connect with back-up lamp power
- White trigger line to connect with left indicator power
- Green trigger line to connect with right indicator power
- Red and the black line is + 12V power input
- Remote control:
M button — Switch module and Exit from camera output
B button — Reverse camera
R button — Right camera
L button — Left camera
F button — Harap camera
(The display view could be switched by both power trigger line and remote control. If you think the power trigger connection is complex, you can use the remote control. Only in that case when exit from back-up to front view 7s, it only supports the back-up trigger. It mainly reduces error operations.)
Gallery
Mga review
May mga walang review pa.